设为首页    加入收藏    Select a language: 中文 |  English
搜索:
 
 
 

地址:江苏省无锡市钱桥镇南西漳工业园区漳盛路
传真:86-510-83235228
联系人:赵晓东
手机:13606199329
E-mail:office@wxwandong.com
新宝5主页 > 新闻中心
 
板金加工开平机的使用
发布者:admin  日期:2012-8-18 9:54:24  点击:1691
  开平机是板金加工中常用的设备,开平机的定型主要取决于被校带材的厚度、材质和要求。料越厚所需结构钢性要越好,辊数越少,辊经越大,功率越大,反之亦然。
  开平机为辊式金属板料整平专用设备。通常由动力、主机和电器控制等部分组成。利用多辊工作原理,使板料在上、下开平辊之间反复变形,消除应力,达到开平的目的。在上、下排工作辊外侧,设钢性支撑辊(轮),构成四重式组辊结构。板料通过开平机,可明显改善其平整状态,提高工件的质量。可独立工作,用于单块板材的开平;亦可在本机前配置开卷、引料,后面配置剪切、垛料及联机机构等,通过控制系统连成性能完备的生产线,对金属卷材进行整平、分切。 (图/文http://www.wxwandong.com/
Kaiping machine is commonly used in sheet metal processing equipment, Kaiping machine stereotypes depends mainly on the calibrated strip thickness, material and requirements. The thicker the material required to better structural steel, roll number less, roll through larger, power is greater, and vice versa.Kaiping machine for roller leveling equipment of sheet metal. Usually consists of a power, host and electric control components. Use of multi roller working principle, make the sheet in Kaiping between the rollers, cyclic deformation, stress relief, to Kaiping for the purpose of. In the upper, lower work roll lateral, set steel support roller ( wheel ), consisting of four heavy type roller structure. Sheet feeding machine through Kaiping, can significantly improve the flat state, improve the quality of workpieces. Can work independently, for a single piece of sheet of Kaiping; also in the machine configuration uncoiling, feeding, shear, placed behind the piled material and online institutions, through the control system into a complete performance of the metal coil production line, for leveling, slitting.
 
[返回] [打印]
 
苏ICP备10029904号-1
 

纵剪机 | 分条机 | 开平机 | 产品展示 | 联系我们

Copyright © 无锡市新宝5机械有限公司, All rights reserved, 2010-2011